Power Factor Control Relay Type 1188
- Most economical APFC Relay available in market.
- No settings, no programming to make.
- Sensitivity better than I % (5OmA).
- Auto detection & indication of low load current & wrong wiring.
- Built-in software timers for fast correction yet ensuring capacitors safety.
- Available in 2, 4, 6 & 8 stages.
- Field proven design.
Power Factor Control Relay Type 1143
- 4 Digit Digital Power Factor Meter for accurate measurement.
- Built in Auto-Manual Control.
- Calibrated P.F Setting & Dead Band Setting.
- Auto detection of external wrong connections.
- Fault indication for no load current or wrong wiring.
- Special versions available for Thyristor Real Time Control.
- Special Sequences on request (Factory Set - FIFO).
- Built in Test Facility.
- Sensitivity better than 1% (50mA).
- Available in 4,6,8, 10, 12, 14, & 16 Stages
Power Factor Control Relay Type 1179
- Truly Intelligent Kvar based APFC Relay.
- Self Learning, no settings, no programming to be done.
- Automatically senses the capacitor values connected at each stage.
- Sensitivity better than 1% (50mA).
- Special alarm control provided for wrong external connection, capacitor insufficent etc.
- Built-in software timers for fast correction yet ensuring capacitor safety.
- Special version available for Thyristor Real Time Control.
- Available in 4,6,8, 10, 12, 14, & 16 Stages
Power Factor Control Type 2205
- Programmable upto 12 stages.
- Alarm Output for Insufficent Compensation,Over THD & Over Voltage.
- Three Phase Four Wire Triple Element Measurements (3 C.T) for balanced/unbalanced loads.
- Bright 4 Digit 14.2mm LED Display.
- Programmable Parameters.
- Built-in Power Analyser : Displays V, A, Hz,COS j,KW,Kvar,THD, KVA of each phase & Total.
Single Phase Digital Voltmeter [Type DMV-1]
- Bright LED 7 Segment 14.2mm Display.
- Available range : 0 - 600V.
- Also available for PT Opertated HT Applications.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 65mm also available in
- Size : 48mm X 96mm X 110mm.
Three Phase Digital Ammeter [Type DMA-3]
- Bright LED 7 Segment 14.2mm Display.
- Auto scroll facility Available.
- Available range : 30.0/5A to 1500/5A.
- C.T Ratio selectable by DIP Switch at rear.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 75mm.
Digital Frequence Meter [Type DMF]
- Bright LED 7 Segment 14.2mm Display.
- Microcontroller based.
- Available range : 30.00 - 99.00Hz.
- Also available for PT Opertated HT Applications.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 65mm also available in
- Size : 48mm X 96mm X 110mm.
Digital Watt, KW and MW Meter
- Bright LED 7 Segment 14.2mm Display.
- Micrcontroller based.
- Time shared four quandrant multiplier technology.
- Also available for PT Opertated HT Applications.
- Accuracy Class : 1.0
- Available in Single Phase Single Element, Three Phase Double Element Three Phase Triple Element versions.
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 150mm.
Digital Power Factor Meter
- Bright LED 7 Segment 14.2mm Display.
- Micrcontroller based.
- Separate LED Indications for LEAD and LAG.
- 4 Digit Display for accurate measurement.
- Fault indication on display for no load current & wrong wiring.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 75mm.
V-A-F Meter [DM3060]
- True RMS 4 Digit Measurement of Voltage & Current.
- Four Digit Frequency Measurement.
- Flicker free bright 14.2 mm LED Display.
- Auto Scroll Facility.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
KVA-KW-PF Meter [DM3150]
- True RMS 4 Digit measurement of KVA, KW & Power Factor.
- Auto Scroll Facility Available.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 85mm.
Multifunction Meter Type 3033
- Backlit 16 X 1 LCD Display.
- Micrcontroller based.
- True RMS.
- Measures V, A, Hz, KVA, KW, PF, Kvar, Kwh, KVAh.
- Accuracy Class : 1.0
- Comact Standard DIN Flush Mounting.
- Size : 96mm X 96mm X 80mm.
Counter type Energy Meter [Type 3022]
- 6 Digit Counter type Display.
- True RMS CT PT Operated.
- Three Phase Four Wire System.
- Accuracy Class 1.0
- Isolated pulse output provided.
- Size : 96mm X 96mm X 80mm.
LCD Display Energy Meter [Type 3023]
- Backlit 16 X 1 LCD Display.
- Microcontroller based.
- Three Phase Four Wire System.
- C.T Primary Site Selectable.(0-5000A).
- Range of reading : 0 - 99999999.9 KWh.
- Accuracy Class 1.0S as per IS13779.
- Compact Standard DIN Enclosure.
- Size : 96mm X 96mm X 80mm.
LED Display Energy Meter [Type 3024]
- Bright LED 7 Segment 8 Display.
- Three Phase Four Wire System.
- Microcontroller based.
- C.T Primary Site Selectable (0-5000A)
- Range of Reading : 0 - 9999999.9 KWh.
- Accuracy Class 1.0S as per IS13779.
- Compact Standard DIN Enclosure.
- Size : 96mm X 96mm X 80mm.
Digital Meter Setpoint Relay for Current [Type MRD-A]
- True RMS.
- Four Digital Display from 0.000 to 1.000.
- Separate indication for lead & lagging power factor by LED.
- Alarm setpoint is factory programmed at 0.96lag & 0.99lead.
- Time delay of 10secs is programmed for lag as well as lead output.
- Two Seperate Potential Free contacts at output for alarm/trip.
Digital Meter Setpoint Relay for Voltage [Type MRD-V]
- Bright LED 7 Segment 14.2mm Display.
- Available for Single Phase Control.
- Two separate output relays for high setting & low setting.
- Works like an under voltage-over voltage relay with display.
- Two separate output relays for high setting & low setting.
- Range available is 0 - 600V AC.
- Also available for PT operated HT Applications.
Digital Meter Setpoint Relay for Frequency [Type MRD-F]
- Bright LED 7 Segment 14.2mm Display.
- Two separate output relays for high setting & low setting.
- Works like an under frequency-over frequency relay with display.
- Available range of 45.0Hz to 55.0Hz.
- It is designed to accept wide-ranging input voltage from 50V to 600V.
- Size : 96mm X 96mm X 150mm.
Digital Meter Setpoint Relay for Kvar [Type MRD-Kvar]
- True RMS.
- Time Shared Four Quadrant multiplier technology.
- Accurate measurement at all power factors.
- Available in three phase double element only.
- Available for L.T as well as H.T applications.
- Two separate output relays for high setting & low setting.
- Bright LED based 7 segment 14.2mm Display.
- Size : 96mm X 96mm X 150mm.
Digital Meter Setpoint Relay for KW [Type MRD-KW]
- True RMS.
- Time-shared four quadrant multiplier technology.
- 7 segment 14.2mm LED based bright Display.
- Accurate measurement at all power factors.
- Can be used as Maximum Demand Control Unit.
- Two Separate Potential Free contacts at output.
- Size : 96mm X 96mm X 150mm.
Digital Meter Setpoint Relay for Power Factor [Type MRD-PF]
- True RMS.
- Four Digital Display from 0.000 to 1.000.
- Separate indication for lead & lagging power factor by LED.
- Extremely Useful where manually power factor is controlled by fixed capacitors.
- Alarm setpoint is factory programmed at 0.96lag & 0.99lead.
- Time delay of 10secs is programmed for lag as well as lead output.
